QAqc Grp Piping Inspector

3 weeks ago

المملكة العربية السعودية, Saudi Arabia AP Middle East IG LLC Full time

At Air Products, our purpose is to bring people together to reimagine what’s possible, collaborate and innovate solutions to the world’s most significant energy and environmental sustainability challenges. Grow with us as we embark on building tomorrow together by being the safest, most diverse and most profitable industrial gas company in the world.

**Reimagine What’s Possible**

**II. **

The QAQC Inspector - GRP / FRP is responsible to ensure that all GRP / FRP / RTR construction and commissioning activities are performed in accordance with the provisions of the Construction Quality Plan and AP Engineering Requirements.

**III, NATURE AND SCOPE**

Safety & Quality are very important aspect in all project phases,

Travel might require for this position both short & long business trips as needed.

**IV. DIMENSIONS**:

- Coordinating site construction activities with Engineers / QC GRP Inspectors of EPC Sub-contractors and Client.
- Working in a Mega size project
- Multi
- project Type: EPC Oil & Gas, Petrochemical, Infrastructure Plants

**V. PRINCIPAL ACCOUNTABILITIES**

An approved QAQC Inspector - GRP / FRP has the responsibility and commensurate authority to accomplish the following duties:

- Reporting to the Site QAQC Department Manager
- Monitoring and implementation of QMS Procedures, PQP, ITP, Method statement, Manufacturer’s Lamination Procedures & and reporting deviations from management system / contractual requirements of the projects.
- Review subcontractor’s ITPs for GRP piping works
- Verify qualification records of Subcontractor bonders/laminators, Supervisors and QC Inspectors if trained by the same Manufacturer that would supply GRP materials in GHE project.
- Witness bonders initial pressure test.
- Attend pre-construction quality meeting and Subcontractors quality meetings.
- Review procedure for installation of GRP piping, lamination, and repair.
- Verify pipe laying, alignment, internal cleaning as validated by survey coordinates & levels.
- Verify strict implementation of environmental controls / surface preservation during lamination (i.e. use temp shelters/ sunscreen) during lamination in direct sunlight and/or windy condition to protect against contamination of in-process activities. Record dew point vs ambient temp to ensure the difference does not exceed manufacturer’s recommendation.
- Perform fit-up inspections. Check lamination & fit-up crews have tolerance requirement document (i.e. maximum gap and maximum misalignment), lamination recipes, IFC drawings applicable for the type and diameter of joints they are working on.
- In joint surface preparation, verify disk grit size and that surfaces have been adequately ground off
- Check lamination joint by dimensional and visual defects as per joint type.
- Witness Barcol Hardness verification for site applied reinforcements to GRP components if / when required.
- Check adhesive bonding for all joints.
- Check repair of joints (if required) specific to applicable joint / resin type i.e. GRE, GRVE, GRUP etc.
- Witness assembly / gasket installation and bolt-up / torque procedure by strictly following manufacturer’s tightening sequence and graduated increments with calibrated torque wrench.
- Verification of cleanliness requirements for large bore internal pipe systems that are impracticable in performing water flushing prior to hydrotest.
- Conduct pre-hydrotest check (line walkdown), document review & test clearance of Hydrotest Package/s approved by Engineering.
- Witness pressure testing, check water quality, line water filling, venting, test manifold, pressure gauges & relief valves are calibrated. Line drained / dried after hydrotest and reinstatement.
- Witness GRP Pipe Golden Joint (closure weld) in accordance with manufacturer’s procedure and project specification.
- Check final survey prior to backfilling i.e. coordinates & levels.
- Monitor backfilling work to ensure all materials does not contain stone that could damage GRP pipe during backfilling work.
- Coordinate quality activities with subcontractors and any other individual parties who may be working on the same site.
- Coordination with clients / third party, in accordance with approved ITP, for agreed witness inspections & tests.
- Ensuring all equipment’s, tools and materials meet with the project quality requirements and that personnel have been adequately trained to use them safely.
- Liaise with client representative concerning quality matters on site.
- To be conversant with the company QHSE procedures & policies and ensure that all the people on the site observe and implement them.
- Identifying near miss and nonconformities in materials, products, processes, procedures and reporting the near miss / nonconformities in the near miss / nonconformity report.
- Verification of implementation of corrective & preventive actions against the nonconformities and reporting results to QA/QC Engineer and line managers, if necessary.
- Notify to QA/QC

  • QAqc Grp Piping Inspector

    2 months ago

    المملكة العربية السعودية, Saudi Arabia Air Products Full time

    MEET-KSA-NEOM-Duba **Job Description and Qualifications** **. ** The QAQC Inspector - GRP / FRP is responsible to ensure that all GRP / FRP / RTR construction and commissioning activities are performed in accordance with the provisions of the Construction Quality Plan and AP Engineering Requirements. - **III, NATURE AND SCOPE** Safety & Quality are very...

  • QAqc Grp Piping Inspector

    2 weeks ago

    المملكة العربية السعودية, Saudi Arabia Air Products Full time

    MEET-KSA-NEOM-DubaJob Description and Qualifications. The QAQC Inspector - GRP / FRP is responsible to ensure that all GRP / FRP / RTR construction and commissioning activities are performed in accordance with the provisions of the Construction Quality Plan and AP Engineering Requirements.- III, NATURE AND SCOPESafety & Quality are very important aspect in...

  • QAqc Grp Piping Inspector

    2 weeks ago

    المملكة العربية السعودية, Saudi Arabia AP Middle East IG LLC Full time

    At Air Products, our purpose is to bring people together to reimagine what's possible, collaborate and innovate solutions to the world's most significant energy and environmental sustainability challenges. Grow with us as we embark on building tomorrow together by being the safest, most diverse and most profitable industrial gas company in the...

  • QAqc Inspector

    3 days ago

    المملكة العربية السعودية, Saudi Arabia Air Products Full time

    MEET-KSA-NEOM-Duba **Job Description and Qualifications** **PRINCIPAL ACCOUNTABILITIES** An approved QAQC Inspector - GRP / FRP has the responsibility and commensurate authority to accomplish the following duties: - Reporting to the Site QAQC Department Manager - Monitoring and implementation of QMS Procedures, PQP, ITP, Method statement,...

  • QAqc Inspector

    2 weeks ago

    المملكة العربية السعودية, Saudi Arabia Air Products Full time

    MEET-KSA-NEOM-DubaJob Description and QualificationsPRINCIPAL ACCOUNTABILITIESAn approved QAQC Inspector - GRP / FRP has the responsibility and commensurate authority to accomplish the following duties:Reporting to the Site QAQC Department Manager Monitoring and implementation of QMS Procedures, PQP, ITP, Method statement, Manufacturer's Lamination...

  • QAqc Piping

    2 months ago

    المملكة العربية السعودية, Saudi Arabia Air Products Full time

    MEET-KSA-NEOM-Duba **Job Description and Qualifications** *** The QAQC Inspector - Piping / Welding is responsible to ensure that all field piping / welding construction and commissioning activities are performed in accordance with the provisions of the Construction Quality Plan and AP Engineering Requirements. - **III, NATURE AND SCOPE** Safety &...

  • QAqc Piping

    4 weeks ago

    المملكة العربية السعودية, Saudi Arabia Air Products Full time

    MEET-KSA-NEOM-Duba **Job Description and Qualifications** *** The QAQC Inspector - Piping / Welding is responsible to ensure that all field piping / welding construction and commissioning activities are performed in accordance with the provisions of the Construction Quality Plan and AP Engineering Requirements. - **III, NATURE AND SCOPE** Safety &...

  • QAqc Piping

    2 weeks ago

    المملكة العربية السعودية, Saudi Arabia Air Products Full time

    MEET-KSA-NEOM-DubaJob Description and Qualifications***The QAQC Inspector - Piping / Welding is responsible to ensure that all field piping / welding construction and commissioning activities are performed in accordance with the provisions of the Construction Quality Plan and AP Engineering Requirements.- III, NATURE AND SCOPESafety & Quality are very...

  • QAqc Tank Inspector

    2 months ago

    المملكة العربية السعودية, Saudi Arabia Air Products Full time

    MEET-KSA-NEOM-Duba **Job Description and Qualifications** **. ** The QAQC Inspector - Tanks is responsible to ensure that all field Tanks construction and commissioning activities are performed in accordance with the provisions of the Construction Quality Plan and AP Engineering Requirements. - **III, NATURE AND SCOPE** Safety & Quality are very...

  • QAqc Tank Inspector

    4 weeks ago

    المملكة العربية السعودية, Saudi Arabia Air Products Full time

    MEET-KSA-NEOM-Duba **Job Description and Qualifications** **. ** The QAQC Inspector - Tanks is responsible to ensure that all field Tanks construction and commissioning activities are performed in accordance with the provisions of the Construction Quality Plan and AP Engineering Requirements. - **III, NATURE AND SCOPE** Safety & Quality are very...

  • QAqc Tank Inspector

    3 weeks ago

    المملكة العربية السعودية, Saudi Arabia AP Middle East IG LLC Full time

    At Air Products, our purpose is to bring people together to reimagine what’s possible, collaborate and innovate solutions to the world’s most significant energy and environmental sustainability challenges. Grow with us as we embark on building tomorrow together by being the safest, most diverse and most profitable industrial gas company in the...

  • QAqc Mechanical Inspector

    2 months ago

    المملكة العربية السعودية, Saudi Arabia Air Products Full time

    MEET-KSA-NEOM-Duba **Job Description and Qualifications** *** The QAQC Inspector - Mechanical is responsible to ensure that all field Mechanical (static & rotating) construction and commissioning activities are performed in accordance with the provisions of the Construction Quality Plan and AP Engineering Requirements. - **III, NATURE AND SCOPE** Safety...

  • QAqc Mechanical Inspector

    4 weeks ago

    المملكة العربية السعودية, Saudi Arabia Air Products Full time

    MEET-KSA-NEOM-Duba **Job Description and Qualifications** *** The QAQC Inspector - Mechanical is responsible to ensure that all field Mechanical (static & rotating) construction and commissioning activities are performed in accordance with the provisions of the Construction Quality Plan and AP Engineering Requirements. - **III, NATURE AND SCOPE** Safety...

  • QAqc Mechanical Inspector

    3 weeks ago

    المملكة العربية السعودية, Saudi Arabia AP Middle East IG LLC Full time

    At Air Products, our purpose is to bring people together to reimagine what’s possible, collaborate and innovate solutions to the world’s most significant energy and environmental sustainability challenges. Grow with us as we embark on building tomorrow together by being the safest, most diverse and most profitable industrial gas company in the...

  • Grp Lamination Worker

    1 week ago

    المملكة العربية السعودية, Saudi Arabia Dynamic Staffing Services Full time

    Apply **GRP Lamination Worker** - 5-10 Years - Saudi - Fri Mar 29 2024 - | Vacancy Code : 136667 Job Type : Worker, Industry : Manufacturing, Contract Length : 24 months, Total Vacancy : 40 - To perform GRP (Fiberglass) Steel, piping laminations, adhesive bonding works. **Knowledge & Qualification**: - null **Role & Responsibilities**: - 5-10...

  • Grp Lamination Worker

    2 weeks ago

    المملكة العربية السعودية, Saudi Arabia Dynamic Staffing Services Full time

    GRP Lamination Worker 510 Years Saudi Thu Mar- | Vacancy Code : 123616Job Type : Worker,Industry : Manufacturing,Contract Length : 12 months,Total Vacancy : 10 To perform GRP (Fiberglass) Steel, piping laminations, adhesive bonding works. 510 Years Saudi Thu Mar- | Vacancy Code : 123616Job Type : Worker,Industry : Manufacturing,Contract Length : 12...

  • QAqc Mep Inspector

    2 weeks ago

    المملكة العربية السعودية, Saudi Arabia Air Products Full time

    MEET-KSA-NEOM-DubaJob Description and QualificationsII. The QAQC Mechanical (MEP) Inspector is responsible to ensure that all field construction and commissioning activities are performed in accordance with the provisions of the Construction Quality Plan and AP Engineering Requirements.- III, NATURE AND SCOPESafety is a very important aspect in all project...

  • Grp Lamination Worker

    2 weeks ago

    المملكة العربية السعودية, Saudi Arabia Dynamic Staffing Services Full time

    ApplyGRP Lamination Worker 510 Years Saudi Fri Mar- | Vacancy Code : 136667Job Type : Worker,Industry : Manufacturing,Contract Length : 24 months,Total Vacancy : 40 To perform GRP (Fiberglass) Steel, piping laminations, adhesive bonding works.Knowledge & Qualification:- nullRole & Responsibilities: 510 Years Saudi Fri Mar- | Vacancy Code : 136667Job Type :...

  • QAqc Mep

    2 months ago

    المملكة العربية السعودية, Saudi Arabia Air Products Full time

    MEET-KSA-NEOM-Duba **Job Description and Qualifications** **II. ** The QAQC Mechanical Inspector is responsible to ensure that all field construction and commissioning activities are performed in accordance with the provisions of the Construction Quality Plan and AP Engineering Requirements. - **III, NATURE AND SCOPE** Safety is a very important aspect...

  • QAqc Mep

    4 weeks ago

    المملكة العربية السعودية, Saudi Arabia Air Products Full time

    MEET-KSA-NEOM-Duba **Job Description and Qualifications** **II. ** The QAQC Mechanical Inspector is responsible to ensure that all field construction and commissioning activities are performed in accordance with the provisions of the Construction Quality Plan and AP Engineering Requirements. - **III, NATURE AND SCOPE** Safety is a very important aspect...