Non-destructive Inspection Technician

3 weeks ago

Riyadh, Saudi Arabia Amentum Full time

Supporting the Most Exciting and Meaningful Missions in the World

Non-Destructive Inspection Technician (Aviation)

Will perform Field and Sustainment Level maintenance support/augmentation to include: Production control, Quality Control, Supply Management, maintenance, and repair of aircraft. Position requires a skilled Non-Destructive Technician with the ability to perform multiple formats of logistics supply chain management to include military supply codes and civilian transport. Organizational, Intermediate, and Depot level experience are desired to inspect, repair, remove, replace aeronautical system parts and components. Requires skill in database management, repairable documentation procedures, Support Equipment management, tools and tool room management, HAZMAT procedures, and precision calibration tools tracking.

Shall work in specialized shops associated with fixed base operations Field Level maintenance as well as perform troubleshooting, testing, maintenance repairs and Technical Directive compliance on the H-60 Airframe in Saudi Arabia.

Essential Responsibilities:
NDI/NDT Level 2 Inspector/Technician/Trainer - Level 2 individuals shall:
Have the skills and knowledge to interpret codes, standards, and other contractual documents that control the NDI/NDT method(s) as utilized by Williams International.

Be capable of assuming technical responsibility for the NDI/NDT facility and staff.

Be capable of selecting the method and technique for a specific inspection. Be capable of preparing and verifying the adequacy of procedures in the method certified.

Approve NDI/NDT procedures and other NDI/NDT-related work instructions for technical adequacy in the method in which they are certified.

Have a general knowledge of other NDI/NDT methods and product technologies used by Williams International.

Conduct NDI/NDT for acceptance of parts only when a demonstration of proficiency in this capability was included in the practical examination.

May be required to overhaul, repair parts, accessories, and components of hydraulic systems, environmental control systems, flight control systems, and vent systems. Visually checks components to locate worn, dirty, or poorly adjusted parts and accessories. Corrects problems by removing, cleaning, reinstalling, or replacing defective parts, e.g., bad actuators, corroded fuel lines, etc. Looks up replacement parts in manuals or compares with samples. Obtains standard parts that are identified.

Knowledge and skill in the use of standard and specialized tools and test equipment of the trade including fixtures, templates, scales, test stands and external power sources.

High School graduate or equivalent. Minimum five (5) years documented experience (Process Logs) documenting performed NDI inspection tasks of aircraft and aircraft components relative to the inspection, modification and repair of military aircraft is required.

Must meet Level 2 qualification process hour standards in accordance with National Aerospace Standard 410 (NAS410) in Eddy Current, Ultrasonic, Magnetic Particle, and Dye Penetrant disciplines.

Must have ability to successfully pass Company Level 2 written and practical certification examinations and eye examination as outlined in NAS410.

Must demonstrate skills and knowledge to set up, calibrate and operate equipment, conduct inspections and to interpret, evaluate and document results in accordance with procedures approved and utilized by the appropriate Level III or Government customer agency.

Shall be thoroughly familiar with the scope and limitations of the method in which they are certified and shall be capable of directing the work of trainees and Level I personnel. The individual shall be able to organize and document NDI results.

The individual shall be familiar with the codes, standards, process controls and other contractual documents that control the method as utilized by the Company or customer agency.

Knowledge and use of special tools/equipment required to perform assigned inspection/maintenance tasks is mandatory.

5 years Level II experience

Proficiency with Microsoft Word, Excel, and PowerPoint

Must be fluent in written and spoken English

Must be able to meet physical requirements associated with and/or pass any medical

examination requirements related to performing daily assigned tasks.

Work Environment, Physical Demands, and Mental Demands:
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed are representative of the knowledge, skills, and/or abilities required. Reasonable accommodations may be made to enable individuals with disabilities to perform essential job functions.

Must be able to walk and stand on level and/or inclined surfaces for certain periods throughout the day.

Must be able to climb stairs, ramps, ladders, and work stands.

Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and

  • Inspection Air diver

    3 weeks ago

    Riyadh, Saudi Arabia WRS - Worldwide Recruitment Solutions Full time

    1) Carry out non-destructive testing such as tests for cracks on the legs of oil rigs at sea.2) Check and maintain diving equipment such as helmets, masks, air tanks, harnesses and gauges. 3) Communicate with workers on the surface while underwater, using signal lines or telephones.4) Cut and weld steel, using underwater welding equipment, jigs, and...

  • Non-Destructive Testing Electrical Technician

    2 weeks ago

    Riyadh, Saudi Arabia Cutting Edge Search Full time

    Perform administrative dutiesincluding report writing and record-keeping for welding workperformed by the team.Provide technical adviceto lower craftsmen, operations, and maintenance for T&Is orlarge fabrication projects.Ensure adherence tocompany standards and safe welding procedures by all craftsmenunder your supervision.

  • Non-Destructive Testing Electrical Technician

    2 weeks ago

    Riyadh, Saudi Arabia Cutting Edge Search Full time

    Perform administrative duties including report writing and record-keeping for welding work performed by the team.Provide technical advice to lower craftsmen, operations, and maintenance for T&Is or large fabrication projects.Ensure adherence to company standards and safe welding procedures by all craftsmen under your supervision.

  • Sr Inspector Eng

    1 day ago

    Riyadh, Saudi Arabia Energy Jobline Full time

    Performs complex inspections in one or more of the following disciplines: Civil/Architectural, Plumbing/HVAC, Electrical, Instrumentation, Crane, Process Piping & Equipment / Welding, Coatings, Relief Valves, Communications, Vendor Quality Control, Vendor Quality Assessor, Non-Destructive Testing, or CathodicProtection. Performs or oversees onsite...

  • Inspection Air diver

    4 weeks ago

    Riyadh, Saudi Arabia WRS - Worldwide Recruitment Solutions Full time

    1) Carry outnon-destructive testing such as tests for cracks on the legs of oilrigs at sea.2)Check and maintain diving equipment such as helmets,masks, air tanks, harnesses and gauges.3) Communicate withworkers on the surface while underwater, using signal lines ortelephones.4)Cut and weld steel, using underwater weldingequipment, jigs, and supports.

  • Chiller Technician

    4 weeks ago

    Riyadh, Saudi Arabia NASCOM Full time

    Chiller Technician Role A Chiller Technician is responsible for maintaining and repairing chillers (refrigeration systems) and other related equipment. They diagnose problems, inspect and test systems, perform maintenance and repairs, and ensure that equipment is running efficiently and safely. Chiller Technician Duties Inspect and maintain chillers and...

  • Aircraft Ground Equipment Technician

    4 weeks ago

    Riyadh, Saudi Arabia Amentum Full time

    49570 On Site Riyadh, Saudi Arabia Full time The Aircraft Ground Equipment Technician incumbent will support the maintenance mission in the following areas: Inspect, troubleshoot, maintain, repair, and adjust all common and peculiar aviation ground support equipment such as the turbine engine powered US Army Aviation Ground Power Unit (AGPU). Types of...

  • Mep Technician

    6 days ago

    Riyadh, Saudi Arabia RIYADH SAUDI ARABIA Full time

    MEP technician **Installing, inspecting, maintaining and repairing Electrical system for villas and residential apartments**. **Salary**: ﷼6,000.00 - ﷼7,000.00 per month Ability to commute/relocate: - Riyadh: Reliably commute or planning to relocate before starting work (required)

  • Electronics Technician

    1 week ago

    Riyadh, Saudi Arabia Shoaa Maintenance Full time

    We are searching for a well-organized, reliable electronics technician to join our excellent company. The electronics technician's responsibilities include diagnosing and repairing electronics, reading manuals and installing new equipment, performing routine servicing and inspections, assisting with training, recruitment, and electronic upgrades, and...

  • Cleaning Technician

    7 days ago

    Riyadh, Saudi Arabia First Gulf Company (FGC) Full time

    The Role - A cleaning technician is in charge of the cleaning and maintenance of a building, company, or property. - Though similar to that of maids and janitors, the job consists mainly of deep cleaning tasks. - As a cleaning technician, your primary duties include cleaning floors, washing walls, disposing of garbage, performing routine maintenance, and...

  • Maintenance Technician

    1 week ago

    Riyadh, Saudi Arabia Future Horizon Full time

    We are looking for Maintenance Technician with experience in inspecting, troubleshooting, commissioning and maintenance of Fans, VAV boxes, Pumps, HVAC and Ecology Units **Requirements**: - Minimum 3 years of experience in mechanical and electrical work. - Reports Preparation - Communication skills - Driving License **Salary**: ﷼4,500.00 - ﷼6,000.00...

  • Maintenance Technician

    4 weeks ago

    Riyadh, Saudi Arabia Shawarmer Co Full time

    "Job Description and Requirements Job Summary: We are seeking a skilled Maintenance Technician with expertise in plumbing, electrical systems, mechanical systems, and HVAC to join our team. The ideal candidate will have experience working in restaurants and cafes and good in both Arabic and English languages. A valid driving license is also required for...

  • Bms Technician

    4 weeks ago

    Riyadh, Saudi Arabia NASCOM Full time

    Responsible for the cost-efficient operation of the building's environment-control systems resulting in optimized building and equipment operation, energy utilization, indoor air quality and comfort. Supports the building operations through installation, commissioning, programming, operation, troubleshooting and repair of the environmental-control systems....

  • Ndt Technician

    7 days ago

    Riyadh, Saudi Arabia SISCO JOBS Full time

    Conducting inspections and tests on materials and products using various NDT methods. - Interpreting and analyzing test results to identify defects or irregularities in materials or products. - Preparing detailed reports of inspection and test results. - Collaborating with other professionals such as engineers, manufacturers, and quality control personnel to...

  • Mep Technician

    1 week ago

    Riyadh, Saudi Arabia Work force Full time

    **Job Summary**: The MEP Technician, also known as a Mechanical, Electrical, and Plumbing Technician, is responsible for the installation, maintenance, repair, and troubleshooting of mechanical, electrical, and plumbing systems within a facility. They play a crucial role in ensuring the efficient operation of these systems to maintain a safe and functional...

  • Maintenance Technician

    4 weeks ago

    Riyadh, Ar Riyāḑ, Saudi Arabia Shawarmer Co Full time

    "Job Description and RequirementsJob Summary:We are seeking a skilled Maintenance Technician with expertise in plumbing, electrical systems, mechanical systems, and HVAC to join our team. The ideal candidate will have experience working in restaurants and cafes and good in both Arabic and English languages. A valid driving license is also required for this...

  • NDT Technician

    3 weeks ago

    Riyadh, Saudi Arabia Sisco Jobs Full time

    Conducting inspections and tests on materials and products using various NDT methods.Interpreting and analyzing test results to identify defects or irregularities in materials or products.Preparing detailed reports of inspection and test results.Collaborating with other professionals such as engineers manufacturers and quality control personnel to determine...

  • Mep Technician

    4 weeks ago

    Riyadh, Saudi Arabia Taknia Full time

    **Job title**:MEP technician **2. Job Description**:multi-skilled technicians with the ability and qualifications to undertake both mechanical and electrical, instrumentation system maintenance tasks. **3. Roles and responsibilities**: - Carry out the preventive and corrective maintenance of the mechanical and electrical equipment such as but not limited...

  • Aircraft Maintenance Technician

    4 weeks ago

    Riyadh, Saudi Arabia BAE Systems Full time

    **Aircraft Maintenance Technician (AMT)** **Salary: Competitive** **Location: Al-Majma’ah, Saudi Arabia** **JOB PURPOSE** BAE Systems is the UK Government’s nominated Prime Contractor under the Government-to-Government arrangements that are in place to provide equipment, support and training to Saudi Arabia. We provide maintenance of Royal Saudi Air...

  • Maintenance of Way Technician

    4 days ago

    Riyadh, Saudi Arabia Eram Talent Full time

    Eram Talent, a leading Talent Acquisition Consultancy, is currently seeking a Maintenance of Way Technician for a reputable company in the transportation industry. The Maintenance of Way Technician will be responsible for the inspection, maintenance, and repair of tracks, bridges, and other infrastructure components to ensure safe and efficient...