Operator, Furnace Charger

Will be assigned in Rolling Mill Reheating Furnce Operation

**Major Responsibilities & Duties performed**: **S** - Person should be familaiar with Induction Furnace Operational activities - Getting the proper feedback from the reliever. - Inspection of f/c lining and given proper feedback to foreman. - Responsible to check all equipment/consumables are available on floor. - Responsible to monitor all operators are...

**Major Responsibilities & Duties performed**: 1. Getting feedback from reliever. 2. Take up all the jobs in absence of EAF foreman. 3. Asking shift foreman about the planning for the shift charge mix, furnace gunning time, electrode change/other jobs **Handover the shift with ensuring that**: - Gunning machine is full & in working position.*** - All...

Getting feedback from reliever. 2. Take up all the jobs in absence of EAF foreman. 3. Asking shift foreman about the planning for the shift charge mix, furnace gunning time, electrode change/other jobs **Handover the shift with ensuring that**: - Gunning machine is full & in working position.*** - All equipment’s are running well or informed -...

Getting the proper feedback from the reliever. - Responsible to inform/meet Foreman at start of shift. - Check everything on floor after relieving. - Responsible to operate charging car on floor safely. - Responsible to operate (50 tons) crane safely. - Check (50 tons) crane remote is in working condition if found any problem inform foreman. - Responsible...

Responsible to operate slag pot carrier for dumping of hot slag / molten slag in slang pit dumping station, as hot slag is drain from the furnace into slag pot during steel melting process. - Responsible to operate slag carry to removes slag pot from down furnace carefully and transfer molten slag to hot slag dumping area for further dumping and cold...

Getting feedback from reliever. - Check availability of manpower in his area planning for shift activity with coordination of shift manager/Superintendent about charge mix, EAF gunning time, electrode change & other furnace related jobs. - Furnace smooth production & furnace maintenance is the sole responsibility, coordination with scrap yard, LRF, Ladles &...

Responsible to Look after the SMS Area under the Furnaces in Slag & Tapping Pits Area. - Slag Handling is sole responsibility of Slag Operators in SMS Area and should follow the shift Foreman plan for the daily shift Jobs. - Slag Operator is responsible to clean the LTC Track for smooth & free movement of Ladle Transfer Car from EAF to LF after & before...

Responsible to check all the levels and temperatures of the hoppers from HMI and writes in the shift log book in the start of shift. - Responsible to Charge the required material i.e. DRI, Fluxes and Ferro Alloys in the hoppers through HMI available in the Material Handling Control Room. - Calculate the volume/space of the hopper to confirm the quantity of...

Responsible to Operate Bob Cat to remove, Clean Hot & cold slag which was drain over flow from EAF & fell under both the furnace in slag pit area and need to clean & dump cold slag at designated dumping Area in safe manners. - Removing Hot & cold Slag under the Pit area is sole responsibility of Bob Cat Operator and follow the shift Foreman planning for the...