QA/QC Inspector

AMAQ Interiors is hiring a QA/QC MEP inspector for FITOUT projects only. DO NOT APPLY if you can not join within 5 days. DO NOT APPLY if you do not have MEP QAQC 5 years experience. Role Description / Responsibilities
• Responsible for complete QA/QC inspection and documentation for all MEP works including HVAC, electrical, plumbing, drainage, fire alarm, firefighting and associated ELV interfaces.
• Prepare, maintain and close all MEP QA/QC documentation in accordance with project specifications, approved drawings, consultant requirements and applicable codes.
• Prepare and submit Material Inspection Requests (MIRs), Material Approval Requests(MARs), Drawings Approval Requests (DAR) and maintain the MIR log and all the other logs.
• Prepare and submit Work Inspection Requests (WIRs/IRs) and coordinate inspections with the consultant/client.
• Prepare and maintain Inspection & Test Plans (ITPs) for all MEP activities.
• Prepare Method Statements, inspection checklists and QA/QC forms for MEP activities.
• Maintain complete QA/QC registers and trackers including WIR, MIR, NCR, RFI, material approval and testing/commissioning logs.
• Conduct daily site inspections to ensure MEP installation complies with approved shop drawings, specifications, approved materials and method statements.
• Identify defective/non-compliant work and issue or coordinate NCRs, observations and corrective-action reports.
• Follow up NCRs and consultant comments until 100% closure.
• Coordinate with MEP engineers, supervisors and subcontractors to rectify quality issues before consultant inspection.
• Verify that only approved materials are delivered and installed on site and check material certificates, datasheets, test certificates and approvals.
• Inspect HVAC works including ductwork, insulation, chilled water/refrigerant piping, FCUs/AHUs, diffusers, dampers and equipment installation.
• Inspect electrical works including containment, conduits, cable trays, wiring, DBs, panels, lighting, power, earthing and associated systems.
• Inspect plumbing and drainage works including water supply, drainage piping, pressure testing, slopes, supports, insulation and fixtures.
• Inspect firefighting and fire alarm installations and coordinate required inspections and testing.
• Ensure proper MEP coordination above ceilings and within walls before closing ceilings, partitions or access panels, particularly important on high-end fit-out projects.
• Verify MEP interfaces with architectural finishes, joinery, ceilings, lighting, specialist systems and FF&E to prevent damage and rework.
• Witness and document pressure tests, insulation resistance tests, continuity tests, duct leakage tests, flushing, testing & balancing and other required MEP tests.
• Coordinate and maintain complete Testing & Commissioning (T&C) documentation, test sheets and certificates.
• Monitor calibration certificates for testing instruments and ensure only calibrated equipment is used.
• Carry out pre-inspections before raising inspections to the consultant to minimize rejection rates.
• Monitor workmanship quality and ensure installations meet the required high-end fit-out finish standards.
• Prepare snag/punch lists, coordinate rectification and obtain consultant/client closure.
• Review and verify MEP as-built drawings against actual site installations.
• Compile MEP sections of the O&M manuals, warranties, certificates, testing reports and handover documentation.
• Prepare and maintain the complete MEP QA/QC dossier / handover file for final project closeout.
• Attend QA/QC, MEP coordination and consultant meetings as required.
• Provide daily/weekly quality reports and highlight outstanding inspections, NCRs, approvals and quality risks to the Project Manager/QAQC Manager.
• Maintain properly organized electronic and hard-copy records so that every installed MEP activity is traceable from material approval through inspection, testing and final handover.