Testing and Commissioning
6 months ago
Minimum Required Qualifications:
Specialty: Testing and commissioning Engineer.
**Education**:
- Bachelor’s degree in mechanical or electrical, and electronic engineering or related field to his or her specialty
- Master’s degree in mechanical or electrical, or related field to his or her specialty (preferred).
Training: Understanding of International Code and references (NEC, IEEE, NFPA70E, IEC, ARAMCO, ANSI/BICSI, ASME, SBC, ASTM, ACI, BSI ) OSHA, ISO-9001 preferred or T&C certificate or training
Technical knowledge:
LEAD site Engineer should have knowledge of all T&C documents, and this includes but not limited to commissioning plan, checklists, forms (for pre-commissioning & commissioning for all Electricalsystems), method statements, RACI matrices.
LEAD Site Engineer must ensure that for executed test and commissioning tasks according to the test plan and test procedures provided by the supplier or manufacturer recommendation.
LEAD site engineers should make sure all the Record faults, Troubleshooting and finding of electronic equipment and report any defects or deviations from the specification shall be documented and data should be secure.
LEAD site engineers should have good knowledge in MEP.
Monitor and manage the procedure for Compilation of all test packs.
Monitor and manage the Testing and Commissioning Plan.
Monitor and manage the approved templates and forms for Testing and Commissioning
Arrange a report along with checklists for each MEP, ELV and ICT system.
LEAD site engineers should have a knowledge of all tests performed for MEP system.
LEAD site engineer Ensure onsite protection provisions considered when testing & commissioning is performed.
LEAD site engineer Verify, during the programming and T&C phases of a project that the specifications for fall protection are include and consistent with this guideline as well as current codes and local standards.
**Experience**:
15+ years proven experience in Testing and Commissioning quality activities.
10+ years in construction or project T&C related position.
Primary Functions:
Ensure that contractor performing proper trainings before start testing and commissioning to meet current training requirements and have the skills necessary to perform the T&C.
Understand the scope and hazards associated with the T&C work to be performed.
Engineer shall inspect and monitor the area in relation to the T&C Control; escalate non-compliance and violation of scope, codes, and standards; reviews Project Quality Documents and performs other tasks in relation of Projects Quality in area of his or her specialty.
Review of T&C plan contractual requirements (technical standards, specifications etc.)
Before T&C activity engineer have to review the schedule plans and the relevant procedures review and validation of inspection assignment documentation (technical aspects, reference documentation, schedules, drawings, milestones, reporting, logistics, coordination procedure, etc.)
Ensure that at the time of T&C a prompt rescue is planned for and resourced for all work when the high risk.
Stop any work that is being performed in an unsafe manner.
-
Testing and Commissioning
6 months ago
المملكة العربية السعودية, Saudi Arabia Bureau Veritas Full timeWe are a world leader in Testing, Inspection and Certification (TIC), delivering high quality services to help clients meet the growing challenges of quality, safety, environmental protection and social responsibility. Minimum Required Qualifications: Specialty: Testing and commissioning Engineer. Education: - Bachelor’s degree in electrical and...
-
Testing and Commissioning
7 months ago
المملكة العربية السعودية, Saudi Arabia Bureau Veritas Full timeWe are a world leader in Testing, Inspection and Certification (TIC), delivering high quality services to help clients meet the growing challenges of quality, safety, environmental protection and social responsibility. Minimum Required Qualifications: Specialty: Testing and commissioning Engineer. Education: - Bachelor’s degree in mechanical or...
-
Testing and Commissioning
6 months ago
المملكة العربية السعودية, Saudi Arabia Bureau Veritas Full timeWe are a world leader in Testing, Inspection and Certification (TIC), delivering high quality services to help clients meet the growing challenges of quality, safety, environmental protection and social responsibility. Minimum Required Qualifications: Specialty: Testing and commissioning Engineer. Education: - Bachelor’s degree in electrical...
-
Testing and Commissioning
7 months ago
المملكة العربية السعودية, Saudi Arabia Bureau Veritas Full timeWe are a world leader in Testing, Inspection and Certification (TIC), delivering high quality services to help clients meet the growing challenges of quality, safety, environmental protection and social responsibility. Minimum Required Qualifications: Specialty: Testing and commissioning Engineer. Education: - Bachelor’s degree in mechanical...
-
Testing & Commissioning Manager
6 months ago
المملكة العربية السعودية, Saudi Arabia Parsons Full timeIn a world of possibilities, pursue one with endless opportunities. Imagine Next! When it comes to what you want in your career, if you can imagine it, you can do it at Parsons. Imagine a career working with intelligent, diverse people sharing a common quest. Imagine a workplace where you can be yourself. Where you can thrive. Where you can find your next,...
-
Senior Testing and Commissioning
6 months ago
المملكة العربية السعودية, Saudi Arabia ElGihaz holding Full timeRESPONSIBILITIES Coordinate overall management of Testing and Commissioning Activities. - Ensure coordination/production of T & C plan. - Develop commissioning test plans and procedures for various installed equipment. - Report T&C activities including KPI of testing activities/reports to the manager. - Ensure notifications for upcoming testing are sent to...
-
Testing and Commissioning
6 months ago
المملكة العربية السعودية, Saudi Arabia Bureau Veritas Full timeMinimum Required Qualifications: Specialty: Testing and commissioning Engineer. **Education**: - Bachelor’s degree in mechanical engineering or related field to his or her specialty - Master’s degree in mechanical, or related field to his or her specialty (preferred). Training: Understanding of International Code and references (ASME, ASTM, ACI, BSI )...
-
Testing and Commissioning
6 months ago
المملكة العربية السعودية, Saudi Arabia Bureau Veritas Full timeMinimum Required Qualifications: Specialty: Testing and commissioning Engineer. **Education**: - Bachelor’s degree in mechanical engineering or related field to his or hespecialty - Master’s degree in mechanical, or related field to his or her specialty (preferred). Training: Understanding of International Code and references (ASME, ASTM, ACI, BSI )...
-
Testing and Commissioning
6 months ago
المملكة العربية السعودية, Saudi Arabia Bureau Veritas Full timeMinimum Required Qualifications: Specialty: Testing and commissioning Engineer. **Education**: - Bachelor’s degree in mechanical engineering or related field to his or her specialty - Master’s degree in mechanical, or related field to his or her specialty (preferred). Training: Understanding of International Code and references (ASME, ASTM, ACI, BSI )...
-
Testing and Commissioning
6 months ago
المملكة العربية السعودية, Saudi Arabia Bureau Veritas Full timeMinimum Required Qualifications: Specialty: Testing and commissioning Engineer. **Education**: - Bachelor’s degree in electrical engineering or related field to his or her specialty - Master’s degree in electrical, or related field to his or her specialty (preferred). Training: Understanding of International Code and references (NEC, IEEE, NFPA70E,...
-
Testing and Commissioning
6 months ago
المملكة العربية السعودية, Saudi Arabia Bureau Veritas Full timeMinimum Required Qualifications: Specialty: Testing and commissioning Engineer. **Education**: - Bachelor’s degree in electrical and electronic/Telecommunication engineering or related field to his or her specialty - Master’s degree in electronic/Telecommunication, or related field to his or her specialty (preferred). Training: Understanding of...
-
Senior Engineer
6 months ago
المملكة العربية السعودية, Saudi Arabia AECOM Full timeCompany Description **Work with Us. Change the World.** At AECOM, we're delivering a better world. Whether improving your commute, keeping the lights on, providing access to clean water, or transforming skylines, our work helps people and communities thrive. We are the world's trusted infrastructure consulting firm, partnering with clients to solve the...
-
Commissioning Manager
6 months ago
المملكة العربية السعودية, Saudi Arabia Talent Pal Full time**Pays** Arabie Saoudite **Lieu de travail** RIYADH-NEW AL KHARJ ROAD(SAU) **Domaine** Projets Industriels **Lieu** Riyadh **Expérience** Minimum 10 ans - 8 to 10 years of experience in commissioning and start-up PV solar plants. - Thorough understanding of all aspects of solar PV systems and associated SCADA controls. - Experience working with AC...
-
Commissioning Supervisor
6 months ago
المملكة العربية السعودية, Saudi Arabia Talent Pal Full timeOur People & Places Solutions business - reinforces our drive to improve the lives of people everywhere and epitomizes the "why" of what we do - the tremendous positive impact and value our solutions bring to our communities and society as a whole. From facilities delivering life-saving therapies and ensuring clean water to enabling the connection of people...
-
Commissioning Specialist
6 months ago
المملكة العربية السعودية, Saudi Arabia Renewable Energy Grid Solutions Full time**Job Description Summary**: The commissioning specialist is responsible to perform services and maintenance activities on customers' site/property. These activities contribute to, maintain, repair and refurbish sold or existing products. Includes all types of maintenance service (preventive and remedial), manage maintenance facilities and field services...
-
Mechanical Commissioning Engineer
6 months ago
المملكة العربية السعودية, Saudi Arabia Air Products Full timeAt Air Products, our purpose is to bring people together to reimagine what’s possible, collaborate and innovate solutions to the world’s most significant energy and environmental sustainability challenges. Grow with us as we embark on building tomorrow together by being the safest, most diverse and most profitable industrial gas company in the...
-
Pre-commissioning Supervisor
6 months ago
المملكة العربية السعودية, Saudi Arabia Air Products Full timeMEET-KSA-NEOM-Duba **Job Description and Qualifications** - Job Purpose: - Responsible for overseeing Mechanical (Rotating & Static) Pre-Commissioning & Commissioning activities for assigned Areas to ensure EPC Contractor and Subcontractor executes piping activities and delivers systems and subsystems as per agreed planning until completion. - Ensures PC&C...
-
Power Transmission Commissioning Lead/manager
6 months ago
المملكة العربية السعودية, Saudi Arabia Air Products PLC Branch Full timeAt Air Products, our purpose is to bring people together to reimagine what’s possible, collaborate and innovate solutions to the world’s most significant energy and environmental sustainability challenges. Grow with us as we embark on building tomorrow together by being the safest, most diverse and most profitable industrial gas company in the...
-
Senior Commissioning Manager
6 months ago
المملكة العربية السعودية, Saudi Arabia Kent Full time**Location** - Saudi Arabia**Category** - Technical**Date Published** - 20/06/24**Status** - Open- Kent are seeking a Senior Commissioning Manager (Power) to join our Saudi Projects Team! - **Join us. Unleash your energy within.** If you have world-class ambitions to reach the stars while keeping your feet on the ground, we’re the team for you. We've...
-
Rail Systems T&c Expert
6 months ago
المملكة العربية السعودية, Saudi Arabia EWI Recruitment Full time**Rail Systems T&C Expert - Saudi Arabia** *** EWI are supporting a leading international Engineering firm who require a Rail systems T&C Expert for a prestigious rail project in Eastern Saudi Arabia. This is initially a short-term 3-month assignment with the potential to extend or transfer **Key Responsibilities**: - Testing and Commissioning Mastery:...