Testing and Commissioning

2 weeks ago

المملكة العربية السعودية, Saudi Arabia Bureau Veritas Full time

We are a world leader in Testing, Inspection and Certification (TIC), delivering high quality services to help clients meet the growing challenges of quality, safety, environmental protection and social responsibility.


Minimum Required Qualifications:

Specialty:
Testing and commissioning Engineer.

Education:

  • Bachelor's degree in electrical engineering or related field to his or her specialty
  • Master's degree in electrical, or related field to his or her specialty (preferred).

Training:
Understanding of International Code and references (NEC, IEEE, NFPA70E, IEC, ARAMCO, ANSI/BICSI, ACI, BSI ) OSHA, ISO-9001 preferred or T&C certificate or training

Technical knowledge:


T&C Engineer should have knowledge of all type of T&C documents, and this includes but not limited to commissioning plan, checklists, forms (for pre-commissioning & commissioning for all Electrical systems), method statements, RACI matrices.


T&C Engineer have to ensure that for executed test and commissioning tasks according to the test plan and test procedures provided by the supplier or manufacturer recommendation.


  • T&C engineers should make sure all the Record faults, Troubleshooting and finding reports any defects or deviations from the specification shall be documented and data should be secure.


T&C engineers should make sure all the Record faults, Troubleshooting and finding of electronic equipment and report any defects or deviations from the specification shall be documented and data should be secure.

T&C engineers should have good knowledge in Power System for LLP, HLP, LCP for Insulation Resistance test for wires.

T&C engineers should have a knowledge of all tests performed for Main Distribution Boards (MDBs)

CT:

Current Transformer, VT:
Voltage Transformer,

EMI:
Electromagnetic interference, Interface report with CCMS Report, POWER AIR CIRCUIT BREAKERS (ACB)

Test, BATTERY CHARGER test report with CCMS interface monitor battery charger conditions and battery failure, FACTORY ACCEPTANCE TEST, Insulation resistance tests for each main distribution board bus, Continuity tests of each circuit, Primary Injection Tests, Instantaneous Trip Elements:
Test


T&C engineers should have knowledge of all tests performed for Motor Control Centre (MCC) Breaker Trip test report ON/OFF/TRIPPED, Float Switch test report, Pressure Switch test report, Low Suction Pressure Switch test report.


T&C engineers should make sure all the Record faults, Troubleshooting and finding of electronic equipment and report any defects or deviations from the specification shall be documented and data should be secure.

T&C engineers should have good knowledge in Power System for LLP, HLP, LCP for Insulation Resistance test for wires.

T&C engineers should have a knowledge of all tests performed for Main Distribution Boards (MDBs)

CT:

Current Transformer, VT:
Voltage Transformer,

EMI:
Electromagnetic interference, Interface report with CCMS Report, POWER AIR CIRCUIT BREAKERS (ACB)

Test, BATTERY CHARGER test report with CCMS interface monitor battery charger conditions and battery failure, FACTORY ACCEPTANCE TEST, Insulation resistance tests for each main distribution board bus, Continuity tests of each circuit, Primary Injection Tests, Instantaneous Trip Elements:
Test


T&C engineers should have knowledge of all tests performed for Motor Control Centre (MCC) Breaker Trip test report ON/OFF/TRIPPED, Float Switch test report, Pressure Switch test report, Low Suction Pressure Switch test report.

Ensure fall protection provisions are considered when testing & commissioning is performed.


Verify, during the programming and T&C phases of a project that the procedures for T&C are included and consistent with this guideline as well as current codes and local standards.


Experience:
15+ years proven experience in Testing and Commissioning quality activities.

10+ years in construction or project T&C related position.

Primary Functions:


Ensure that contractor performing proper trainings before start testing and commissioning to meet current training requirements and have the skills necessary to perform the T&C.

Understand the scope and hazards associated with the T&C work to be performed.


Engineer shall inspect and monitor the area in relation to the T&C Control; escalate non-compliance and violation of scope, codes, and standards; reviews Project Quality Documents and performs other tasks in relation of Projects Quality in area of his or her specialty.

Review of T&C plan contractual requirements (technical standards, specifications etc.)

Before T&C activity engineer have to review the schedule plans and the relevant procedures review and validation of inspection assignment documentation (technical aspects, reference documentation, schedules, drawings, milestones, reporting, logistics, coordination procedure, etc.)


Ensure that at the time of T&C a prompt rescue is planned for and resourced for all work when the high risk.

Stop any work that is being perfo

  • Testing and Commissioning

    2 months ago

    المملكة العربية السعودية, Saudi Arabia Bureau Veritas Full time

    We are a world leader in Testing, Inspection and Certification (TIC), delivering high quality services to help clients meet the growing challenges of quality, safety, environmental protection and social responsibility. Minimum Required Qualifications: Specialty: Testing and commissioning Engineer. Education: - Bachelor’s degree in electrical and...

  • Testing and Commissioning

    3 weeks ago

    المملكة العربية السعودية, Saudi Arabia Bureau Veritas Full time

    We are a world leader in Testing, Inspection and Certification (TIC), delivering high quality services to help clients meet the growing challenges of quality, safety, environmental protection and social responsibility. Minimum Required Qualifications: Specialty: Testing and commissioning Engineer. Education: - Bachelor’s degree in mechanical or...

  • Testing and Commissioning

    2 months ago

    المملكة العربية السعودية, Saudi Arabia Bureau Veritas Full time

    We are a world leader in Testing, Inspection and Certification (TIC), delivering high quality services to help clients meet the growing challenges of quality, safety, environmental protection and social responsibility. Minimum Required Qualifications: Specialty: Testing and commissioning Engineer. Education: - Bachelor’s degree in electrical...

  • Testing and Commissioning

    3 weeks ago

    المملكة العربية السعودية, Saudi Arabia Bureau Veritas Full time

    We are a world leader in Testing, Inspection and Certification (TIC), delivering high quality services to help clients meet the growing challenges of quality, safety, environmental protection and social responsibility. Minimum Required Qualifications: Specialty: Testing and commissioning Engineer. Education: - Bachelor’s degree in mechanical...

  • Testing and Commissioning

    2 weeks ago

    المملكة العربية السعودية, Saudi Arabia Bureau Veritas Full time

    We are a world leader in Testing, Inspection and Certification (TIC), delivering high quality services to help clients meet the growing challenges of quality, safety, environmental protection and social responsibility.Minimum Required Qualifications:Specialty: Testing and commissioning Engineer.Education: Bachelor's degree in mechanical or electrical, and...

  • Testing and Commissioning

    2 weeks ago

    المملكة العربية السعودية, Saudi Arabia Bureau Veritas Full time

    We are a world leader in Testing, Inspection and Certification (TIC), delivering high quality services to help clients meet the growing challenges of quality, safety, environmental protection and social responsibility.Minimum Required Qualifications:Specialty: Testing and commissioning Engineer.Education: Bachelor's degree in mechanical engineering or...

  • Testing & Commissioning Manager

    2 weeks ago

    المملكة العربية السعودية, Saudi Arabia Parsons Full time

    In a world of possibilities, pursue one with endless opportunities. Imagine Next! When it comes to what you want in your career, if you can imagine it, you can do it at Parsons. Imagine a career working with intelligent, diverse people sharing a common quest. Imagine a workplace where you can be yourself. Where you can thrive. Where you can find your next,...

  • Senior Testing and Commissioning

    3 weeks ago

    المملكة العربية السعودية, Saudi Arabia ElGihaz holding Full time

    RESPONSIBILITIES Coordinate overall management of Testing and Commissioning Activities. - Ensure coordination/production of T & C plan. - Develop commissioning test plans and procedures for various installed equipment. - Report T&C activities including KPI of testing activities/reports to the manager. - Ensure notifications for upcoming testing are sent to...

  • Testing and Commissioning

    2 weeks ago

    المملكة العربية السعودية, Saudi Arabia Bureau Veritas Full time

    Minimum Required Qualifications: Specialty: Testing and commissioning Engineer. **Education**: - Bachelor’s degree in mechanical engineering or related field to his or her specialty - Master’s degree in mechanical, or related field to his or her specialty (preferred). Training: Understanding of International Code and references (ASME, ASTM, ACI, BSI )...

  • Senior Testing and Commissioning

    2 weeks ago

    المملكة العربية السعودية, Saudi Arabia ElGihaz holding Full time

    RESPONSIBILITIESCoordinate overall management of Testing and Commissioning Activities. Ensure coordination/production of T & C plan. Develop commissioning test plans and procedures for various installed equipment. Report T&C activities including KPI of testing activities/reports to the manager. Ensure notifications for upcoming testing are sent to all...

  • Testing and Commissioning

    2 weeks ago

    المملكة العربية السعودية, Saudi Arabia Bureau Veritas Full time

    Minimum Required Qualifications: Specialty: Testing and commissioning Engineer. **Education**: - Bachelor’s degree in mechanical engineering or related field to his or hespecialty - Master’s degree in mechanical, or related field to his or her specialty (preferred). Training: Understanding of International Code and references (ASME, ASTM, ACI, BSI )...

  • Testing and Commissioning

    2 weeks ago

    المملكة العربية السعودية, Saudi Arabia Bureau Veritas Full time

    Minimum Required Qualifications: Specialty: Testing and commissioning Engineer. **Education**: - Bachelor’s degree in mechanical engineering or related field to his or her specialty - Master’s degree in mechanical, or related field to his or her specialty (preferred). Training: Understanding of International Code and references (ASME, ASTM, ACI, BSI )...

  • Testing and Commissioning Manager

    3 weeks ago

    المملكة العربية السعودية, Saudi Arabia Atkins Full time

    SNC Lavalin's Atkins business is one of the largest multidisciplinary, multi sector engineering design consultancies in the world and is part of the SNC Lavalin Group. As one of the world’s most respected design, engineering, and project management consultancies with a leading track record in the defence sector, Atkins are ideally placed to respond to...

  • Testing and Commissioning

    2 weeks ago

    المملكة العربية السعودية, Saudi Arabia Bureau Veritas Full time

    Minimum Required Qualifications: Specialty: Testing and commissioning Engineer. **Education**: - Bachelor’s degree in electrical engineering or related field to his or her specialty - Master’s degree in electrical, or related field to his or her specialty (preferred). Training: Understanding of International Code and references (NEC, IEEE, NFPA70E,...

  • Testing and Commissioning

    2 weeks ago

    المملكة العربية السعودية, Saudi Arabia Bureau Veritas Full time

    Minimum Required Qualifications: Specialty: Testing and commissioning Engineer. **Education**: - Bachelor’s degree in electrical and electronic/Telecommunication engineering or related field to his or her specialty - Master’s degree in electronic/Telecommunication, or related field to his or her specialty (preferred). Training: Understanding of...

  • Testing & Commissioning Engineer

    4 weeks ago

    المملكة العربية السعودية, Saudi Arabia Dynamic Staffing Services Full time

    Apply **Testing & Commissioning Engineer** - 5-12 Years - Saudi - Mon Feb 13 2023 - | Vacancy Code : 123369 Job Type : Staff, Industry : Oil & Gas, Contract Length : 12 months, Total Vacancy : 1 - To work as Testing & Comm Engineer **Knowledge & Qualification**: - Bachelor Degree in Electrical Engg **Role & Responsibilities**: - Capable and...

  • Testing and Commissioning

    2 weeks ago

    المملكة العربية السعودية, Saudi Arabia Bureau Veritas Full time

    Minimum Required Qualifications: Specialty: Testing and commissioning Engineer. **Education**: - Bachelor’s degree in mechanical or electrical, and electronic engineering or related field to his or her specialty - Master’s degree in mechanical or electrical, or related field to his or her specialty (preferred). Training: Understanding of International...

  • Testing & Commissioning Engineer (Water Facilities)

    2 weeks ago

    المملكة العربية السعودية, Saudi Arabia International Skill Development Full time

    Noof Available Positions: 3Employer: SAUDI ARABIAN BECHTEL COMPANYPOEA Registration/Accreditation No:Country: Saudi ArabiaDate Posted: Apr 03, 2023Minimum Education: Bachelor's / College DegreeRequirements: Gender: MaleJob Details:TESTING & COMMISSIONING ENGINEER (WATER FACILITIES)***Qualifications: Minimum Bachelor's degree in Engineering or scientific...

  • Testing & Commissioning Manager (Water Facilities)

    2 weeks ago

    المملكة العربية السعودية, Saudi Arabia International Skill Development Full time

    Noof Available Positions: 3Employer: SAUDI ARABIAN BECHTEL COMPANYPOEA Registration/Accreditation No:Country: Saudi ArabiaDate Posted: Apr 03, 2023Requirements: Gender: MaleJob Details:TESTING & COMMISSIONING MANAGER (WATER FACILITIES)***Qualifications: Bachelors or Masters degree in engineering or scientific discipline, or specialised courses in...

  • Electrical Testing and Commissioning Engineer-3

    1 week ago

    المملكة العربية السعودية, Saudi Arabia Air Products Full time

    MEET-KSA-NEOM-Duba **Job Description and Qualifications** - Electrical Testing and Commissioning Engineer-3 **Req No.** - 45583BR **Employment Status** - Full Time **Organization** - Global Engrg Mfg Technology & Equipment **Business Sector / Division** - GEMTE MEET **Region** - Middle East, Egypt, Turkey (MEET) **Country** - Saudi Arabia Electrical...