CNC Machinist

2 weeks ago

Al Hufūf, Eastern Province, Saudi Arabia NOV Inc. Full time

CLOSING DATE:
07 AUGUST 2023.

Job Summary:

Produces machined parts by setting up and operating a computer numerical control (CNC) machine, maintaining quality and safety standards.

**RESPONSIBILITIES: - Produce parts as per the provided drawings and programs.

  • Inspect and verify that each part is machined as per the provided specifications.
  • Follow all the guidelines and instructions provided by the direct manager (supervisor or team leader).
  • Maintain a neat and clean working environment. Follow all NOV safety rules.
  • Programs mills/lathes, entering instructions (including zero and reference points, setting tool registers/offsets and proving part programs.
  • Setup mills and lathes by installing and adjusting three/fourjaw chucks, tools and fixtures.
  • Verify all required gauges are readily available as per the drawing requirement with valid calibration records.
  • Raise maintenance requests as required.
  • Maintain continuity among work shifts by documenting and communicating actions, irregularities as needed.
  • Complete production and quality records for each individual job.
  • Raise nonconformity reports and inform the direct manager as per procedures.
  • Communicate new developments and process improvement plans with the related team and direct manager.
  • Follow other instructions assigned by the direct manager.
  • Observe and ensure compliance with all Health/Safety/Environmental (HSE) regulations. Encourage safe working practices. Correct obvious hazards immediately and report them to the proper personnel.
  • Sustain 5S and lean process as per company/departmental requirements.

Employee Duties:

  • Daily PM checks of machine before operating and identifying risks.
  • Checking of Specifications, Work Orders, drawing and material and program.
  • Machine/manufacture the part within given time.
  • Report problems to Team Leader.
  • Maintain traceability and inspection report.
  • Follow shop rules advised by Team Leader.
  • Report all unsafe and or hazardous acts or conditions to Manager.
  • Report any damaged or misused equipment, including but not limited to gauges, fixtures, and instruments.
  • Perform other duties as assigned by Supervisor/Manager.
  • Assist with training when required.

EXPERIENCE/EDUCATION/SKILL-SET REQUIRED:

  • High school education or equivalent.
  • Must have a minimum 12year experience in operating a CNC lathe and milling machines.
  • Preferably have knowledge of Heidenheim and Siemens controls and operating.
  • Ability to read and understand CNC programs.
  • Should be able to identify tooling requirements from programs.
  • Ability to understand engineering drawing.
  • Must be able to communicate in English and able to take and follow written and verbal instructions.
  • Have good machine shop knowledge.
  • Be able to read and interpret specifications to API, Grant Prideco, DS1, Vam etc.


Every day, the oil and gas industry's best minds put more than 150 years of experience to work to help our customers achieve lasting success.


We Power the Industry that Powers the World

Throughout every region in the world and across every area of drilling and production, our family of companies has provided the technical expertise, advanced equipment, and operational support necessary for success—now and in the future.


Global Family

We are a global family of thousands of individuals, working as one team to create a lasting impact for ourselves, our customers, and the communities where we live and work.


Purposeful Innovation

Through purposeful business innovation, product creation, and service delivery, we are driven to power the industry that powers the world better.


Service Above All

This drives us to anticipate our customers' needs and work with them to deliver the finest products and services on time and on budget.


Wellbore Technologies
Within NOV Wellbore Technologies, we enhance drilling performance at the rig, both on land and offshore. We understand the complete process and anticipate what our customers need to be successful.

  • CNC Machinist

    2 weeks ago

    Al Hufūf, Eastern Province, Saudi Arabia NOV Inc. Full time

    CNC Machinist required to perform API/premium thread repairs and sub manufacturingJob Description: Machine/manufacture part or connection within given time frame. Checking of specifications, work Orders, technical drawings and material and program. Perform daily maintenance checks of assigned equipment. Produce/Machine threaded connections & parts as per...

  • CNC Machinist

    2 weeks ago

    Al Hufūf, Eastern Province, Saudi Arabia Parker Drilling Company Full time

    Company Description: Parker Wellbore helps energy companies accomplish their drilling and production goals efficiently, reliably, and safely. Our global team supports oil and gas operators with innovative land and offshore drilling services, premium rental tools and well services, and advanced operations and management support. Founded in 1934, Parker...

  • Machinist CNC

    2 weeks ago

    Al Hufūf, Eastern Province, Saudi Arabia NOV Inc. Full time

    CLOSING DATE 18 APRIL 2023.RESPONSIBILITIES/ACCOUNTABILTY & AUTHORITY: Follow all safety rules policies provided by NOV. Produce/Machine threaded Connections & parts as per the provided drawing and program on CNC machines such as, but not limited to lathes and milling machines. Responsible for loading parts, proving tapes, operating controls, setting...

  • CNC Machinist

    2 weeks ago

    Al Qaţīf, Eastern Province, Saudi Arabia Elliott Company Full time

    Overview:To carry out all necessary layout, complex setups, manual and CNC machining. This includes subassembly, tool setting, deburring of parts, dimensional inspections, and final assembly of components as per required specifications in a timely manner. Capable of planning and supervising work with minimal supervision while guiding other employees. Also,...

  • CNC Operator

    2 weeks ago

    Al Hufūf, Eastern Province, Saudi Arabia NOV Inc. Full time

    CLOSING DATE 14th December 2023.Job Summary:CNC Machinist for VMC, Horizontal and Vertical LatheRESPONSIBILITIES/ACCOUNTABILTY & AUTHORITY:Follow all safety rules policies provided by NOV.Produce/Machine threaded Connections & parts as per the provided drawing and program on CNC machines such as, but not limited to lathes and milling machines.Responsible for...

  • CNC Operator

    2 weeks ago

    Al Hufūf, Eastern Province, Saudi Arabia NOV Inc. Full time

    PRIMARY RESPONSIBILITIES: Follow all safety rules policies provided by NOV. Produce/Machine threaded Connections & parts as per the provided drawing and program on CNC machines such as, but not limited to lathes and milling machines. Responsible for loading parts, proving tapes, operating controls, setting offsets, advanced edits, deburring. Inspect and...

  • CNC Machine Operator

    2 weeks ago

    Al Hufūf, Eastern Province, Saudi Arabia Innovex Full time

    JOB SCOPETo strive for continual improvement in meeting established quality objectives, key performance indicators, product quality and product delivery.KEY ACCOUNTABILITIES: Fully comply with and exercise diligence in observing all QHSSE standards specified by management and MODON rules and regulations. Operate assigned CNC machines, making sure that the...

  • CNC Operator

    2 weeks ago

    Al Hufūf, Eastern Province, Saudi Arabia NOV Inc. Full time

    PRIMARY RESPONSIBILITIES: Follow all safety rules policies provided by NOV. Produce/Machine threaded Connections & parts as per the provided drawing and program on CNC machines such as, but not limited to lathes and milling machines. Responsible for loading parts, proving tapes, operating controls, setting offsets, advanced edits, deburring. Inspect and...

  • CNC Intergex

    2 weeks ago

    Al Qaţīf, Eastern Province, Saudi Arabia NOV Inc. Full time

    Duties & Responsibilities:Under the direction of a supervisor and/or experienced machinist, responsible for quality parts produced on CNC machines such as, but not limited, to lathes and milling machines in a timely, safe, and efficient manner. Operate, perform setup changes and first article inspections on production runs utilizing CNC Machines. Load parts...

  • Maintenance Technician

    2 weeks ago

    Al Hufūf, Eastern Province, Saudi Arabia Delta Corporation Full time

    Upon completion of work, enters appropriate information onto worksheet for submission and filing and/or enters into MRP system for filing and tracking. Performs scheduled PMs and visually inspect and test assigned machines and equipment for proper functionality. May be required to order requisition parts as needed. Perform repairs on production machines...

  • Machinist-lathe Operator

    2 weeks ago

    Al Hufūf, Eastern Province, Saudi Arabia Exact Fabrication Services Full time

    Exact Fabrication Services- Close-Job Seekers LoginPasswordLoginForgot Password? New Member ?: Sign Up Here New Member ? Click here to register Job DetailIndustry Construction / Cement / MetalsFunctional Area: ManufacturingTotal Position: 1Job Type: Full Time/Permanent ( First Shift (Day)‎ )Department: Exact Fabrications ServicesJob Location: Dammam, Saudi...

  • Shop Support Technician Iv

    2 weeks ago

    Al Hufūf, Eastern Province, Saudi Arabia TechnipFMC Full time

    TechnipFMC is a global leader in the energy industry, specialized in subsea and surface technologies integrated projects, products, and servicesOur mission and vision:to enhance the performance and drive real change in the traditional and new energy industryHow we do it: by constantly challenging conventions, tackling some of the most complex technical and...

  • Machinist Ii

    2 weeks ago

    Al Hufūf, Eastern Province, Saudi Arabia TechnipFMC Full time

    Location:Dammam, SAEmployment type:EmployeePlace of work:OfficeOffshore/Onshore:OnshoreTechnipFMC is committed to driving real change in the energy industry. Our ambition is to build a sustainable future through relentless innovation and global collaboration - and we want you to be part of it. You'll be joining a culture that values curiosity, expertise, and...

  • Machinist Ii 1 1 1

    2 weeks ago

    Al Hufūf, Eastern Province, Saudi Arabia TechnipFMC Full time

    Location:Dammam, SAEmployment type:EmployeePlace of work:OfficeOffshore/Onshore:OnshoreTechnipFMC is committed to driving real change in the energy industry. Our ambition is to build a sustainable future through relentless innovation and global collaboration - and we want you to be part of it. You'll be joining a culture that values curiosity, expertise, and...